





Clear adhesive labels are one of those packaging details that look effortless and are not. A transp...
View MoreDurable adhesive labels rarely fail for one dramatic reason. More often, an edge lifts after a week...
View MoreIntroduction Cotton is harvested, ginned, pressed into bales, and often stored in open yards for wee...
View MoreCustom Die-Cut Label Materials and Finished Printed Labels from Zhejiang Guanma: One-Stop Partner fo...
View MoreA Buyer's Guide to Sourcing Custom Die-Cut Self-Adhesive Labels: Matching Materials, Printing Method...
View MoreZhejiang Guanma Packaging Co., Ltd. manufactures self-adhesive label stock for woven polypropylene sacks, nonwoven bags and plastic bag formats at our plant in Jiaxing, Zhejiang, China. The Woven & Plastic Bags Label Material manufacturer range is built around the condition that defines these surfaces: a coarse, low-energy, often dusty substrate that pulls at the label edge from the first minute. Material leaves us as jumbo rolls, custom slit rolls, blank die-cut labels or printed finished labels, according to how the project is set up.
Woven bag labelling fails at the edges first. Slit-film polypropylene tape forms a ridged plane, and any stiffness mismatch between label and bag concentrates stress along the perimeter. Our answer in this range is a heavier, dimensionally stable face stock combined with an adhesive that grabs on contact and keeps building peel strength after application.
| Grade and model | Face stock | Adhesive | Liner | Typical bag use |
|---|---|---|---|---|
| 60μm white PP laminated with transparent PET film (K11MH65) | Glossy white PP film with clear PET laminate; stiff, scuff-resistant, fully opaque | Strong rubber adhesive | 80g double-sided silicon paper | Nonwoven bags, BOPP-laminated woven sacks, tyre-side labels requiring very strong initial grab |
| 80g aluminium foil paper (AGMM60) | Foil-faced paper; metallic barrier, dead-fold behaviour that settles into the weave | Strong tyre-grade rubber adhesive | 100g silicon liner | Unlaminated woven PP sacks, nonwoven bags, fertiliser and chemical bags needing moisture and light barrier |
| 80μm matt white woodfree paper (H8MH33) | Matt uncoated woodfree; writable, high opacity, clean barcode contrast | Reinforced hotmelt | 60g yellow glassine | Plastic carrier bags, PE mailers and bottles where extra tack on smooth film is needed |
| Other stocks from our standard programme | PP, PET, PE film, synthetic paper, semi-gloss paper, thermal top paper | Water-based acrylic, hotmelt, solvent, removable, UV-curable, cryogenic, anti-freeze | Glassine 50/60/100/120g; release paper 60/90/120/140g | Bag and pouch projects where climate, removal behaviour or line speed drives the choice |
Jumbo roll widths run 1070/1080 mm for the laminated PP grade and 1020/1080/1530 mm for the foil paper, with cut widths to your applicator.
The bag decides the face stock long before the artwork does. We match on weave profile, film treatment and how the filled sack is handled.
Polypropylene and polyethylene sit near 30 mN/m surface energy, well below the 38–40 mN/m at which most pressure-sensitive adhesives wet out cleanly. On a woven sack the consequence is practical: the adhesive must be soft enough to flow into the weave, tacky enough to hold before dwell does its work, and stable enough to keep that bond through stacking, transport and, on some routes, open-yard storage.
Slitting, die-cutting and printing sit under one roof, so a bag label can be quoted as raw stock or as a finished, application-ready roll.
Our multi-function press set covers flexographic, screen, UV, digital and offset work, which lets us match the process to run length and to the ink system the bag artwork already uses.
Our quality management system is certified to ISO 9001, and control runs in three stages: material selection, pre-production machine testing, and finished goods inspection with machine check-in. The properties that decide whether a bag label stays put are the ones we confirm against the sample approved for the job.
A quotation that holds up in production starts from the bag, not from the label. These inputs let us fix face stock, adhesive, liner, slit width and packing in one pass.
Rolls are palletised and stretch-wrapped, with edge protection on jumbo reels and cartons for die-cut labels. Packing lists follow the order specification so that receiving checks can be completed against the same document the production team worked from.
The 80g aluminium foil paper with strong tyre-grade rubber adhesive is the usual starting point, because the foil dead-folds into the weave profile and the heavier rubber coat fills the valleys between tapes. Where the sack is BOPP-laminated, the 60μm white PP with transparent PET film gives a flatter, more scuff-resistant label with very high initial grab. We confirm the choice on your own sack, since tape width, weave tightness and surface dust vary between bag producers.
Foil-faced and film-faced grades with rubber or solvent adhesive are the ones we specify for sacks stored in yards or moved in rain. Edge lift is the first failure mode on a woven surface, so we normally recommend rounded corners, a slightly generous border and a firm applicator nip. Service life still depends on sun exposure, temperature cycling and how the pallet is stacked, so we set the construction against your storage description rather than a generic claim.
Jumbo rolls are produced at 1070/1080 mm for the laminated PP construction and 1020/1080/1530 mm for the foil paper, with narrower jumbo widths available on request. We slit to your applicator width and supply blank die-cut labels or printed finished rolls. Core size, wind direction and maximum roll diameter are fixed at order confirmation.
Both. Converters and printers take blank jumbo or slit rolls, while end users take printed finished labels through flexo, screen, UV, digital or offset. Inkjet- and laser-compatible surfaces are available where the fill line prints batch codes or barcodes on demand.
Yes. Removable adhesive is part of our standard adhesive set and can be paired with PP, PET, PE or paper faces. Clean removal is a function of dwell time, application temperature and the film it is stuck to, so we recommend a short trial on the actual returnable item before committing a production run.
Send the bag type and fabric weight, whether the surface is treated or printed, the application method and line speed, label size and required roll format, storage and removal conditions, print requirements and expected volume. With those, we return a construction, a sample proposal and a packing plan that the fill line can work to.